runtime error 0x40001 acronis true image 2017

Secondary: 2 HDD RAID 0 (LSI SAS2 MPT Controller) for Dataįor OS Distribution we are using Acronis Snap Deploy 5 on Windows Server 2012 R2 (latest Updates applied on OS and Acronis Snap Deploy 5) We are about to roll out new workstations with their specific storage setup beeing: The alternative method is to go into the Windows 10 Advanced Startup option (Update & Security, then Recovery from the PC Settings) which can also let you boot into the BIOS settings panel.I recently joined this forum because of one specific problem we encounter for a few days now. Note: With these new Lenovo laptops to get into BIOS you have a pin-hole button on the side of the laptop that you push the end of a paper clip into - Lenovo call it the Novo button. I hit similar problems with a new Lenovo B50 laptop and ended up using ATIH 2016 WinPE Rescue Media in the end as I was not able to do this with 2015, though that was over 9 months ago.

You could try changing the BIOS to use legacy mode as per the G50 User Guide in Chapter 4 - Troubleshooting section but that is no guarantee that the standard ATIH 2015 rescue media (linux based) will work with this laptop. You will probably need to create WinPE Rescue Media with the necessary device drivers for your hard drives for this to work correctly, and ideally that WinPE media should be created on the Lenovo G50-45 itself from within Windows 10 as you also will need to install the Windows ADK to create WinPE boot media. So.I'm assuming there's and AMD-specific support issue in the boot process? If I choose option 2, or if I leave the original drive disconnected from USB, It does all the above, but then posts error:Įrror 0x40001: Error occurred while reading the file. I chose 1, and it pauses for about 15 seconds, then spins up the CD (a good sign), then with the CD spinning reads a bit, pauses, and then the CD turns off (a bad sign). With the original drive externally connected via USB, It boots to prompt asking me whether to 1) Continue booting Acronis, 2) Run system report, or c) Continue booting. Since my goal is simply to duplicate the default internal drive to a new SSD before I ever boot the machine the first time.I had the SSD already in the internal spot (which BIOS/UEFI does see), and the original drive (1TB Samsung/Seagate Momentus) connected via USB caddy I originally received as part of a Kingston SSD upgrade kit some years ago.

I'm trying to boot from CD-bootable image of Acronis 2016 that I downloaded from my account, and I also get an error. I also have a G50-45, that is brand new, just received with Windows 10.

Runtime error 0x40001 acronis true image 2017